製作RAMDISK in KERNEL的NetBSD微系統
http://www.freebsdchina.org/forum/viewtopic.php?t=11106&sid=e845ae15d7b44251d49fc09bb8a3154d 製作RAMDISK in KERNEL的NetBSD微系統 Matthew(黑夜編碼人) 前言 在前面我們已經講過如何製作軟碟上運行的FreeBSD和OpenBSD系統,現在我們來看看如何製作一個運行在軟碟上的NetBSD系統。同軟碟中的OpenBSD系統一樣,我們還是將系統中的所有配製檔及程式全部存放到NetBSD的內核中,這樣整個系統看起來就是一個檔。下面讓我們具體來看看如何完成這樣一個微系統的製作。 0、NetBSD的啟動過程 當硬碟MBR中的引導程式接過啟動之後,MBR中的程式將讀入硬碟NetBSD分區中的引導程式,引導程式默認情況下會載入/boot,然後由boot載入內核/netbsd,此時內核開始檢測一些硬體和做一些初始化。初始化完成後kernel將mount root device,然後啟動系統初始化進程/sbin/init,init將根據/etc/rc中的設置來進行初始化等。 1、定制RAMDISK內核 要使用RAMDISK in KERNEL就必須在內核配製檔中加入以下選項: options MEMORY_DISK_HOOKS
options MEMORY_DISK_IS_ROOT # force root on memory disk
options MEMORY_DISK_SERVER=0
options MEMORY_DISK_ROOT_SIZE=10000 # size of memory disk, in blocks
options MEMORY_RBFLAGS=0x00 # boot in to multi-user mode
pseudo-device md 1 # memory disk device (ramdisk) 以上的內核參數意義如下: MEMORY_DISK_ROOT_SIZE : 記憶體磁片大小,以塊為單位
MEMORY_RBFLAGS=0x00 : 啟動到多用戶模式 以下是在我機器上使用的一個內核配製檔 include "arch/i386/conf/std.i386" #options INCLUDE_CONFIG_FILE # embed config file in kernel binary makeoptions COPTS="-Os" # Optimise for space. Implies -O2 # Enable the hooks used for initializing the root memory-disk.
options MEMORY_DISK_HOOKS
options MEMORY_DISK_IS_ROOT # force root on memory disk
options MEMORY_DISK_SERVER=1 # 0 readonly 1 writable
options MEMORY_DISK_ROOT_SIZE=10000 # size of memory disk, in blocks
options MEMORY_RBFLAGS=0x00 # boot in to multi-user mode maxusers 48 # estimated number of users # CPU support. At least one is REQUIRED.
options I386_CPU
options I686_CPU # CPU-related options.
options MATH_EMULATE # floating point emulation # This option allows you to force a serial console at the specified
# I/O address.
#options CONSDEVNAME="\"com\"",CONADDR=0x3f8,CONSPEED=9600 # Avoid irq 5 and 7, the most likely cause of problems on modern laptops.
options PCIC_ISA_INTR_ALLOC_MASK=0xff5f # Standard system options options INSECURE # disable kernel security levels options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
#options NTP # NTP phase/frequency locked loop options USERCONF # userconf(4) support
options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options MALLOC_NOINLINE # Not inlining MALLOC saves memory # File systems
file-system FFS # UFS
file-system MFS # memory file system
file-system MSDOSFS # MS-DOS file system
file-system KERNFS # /kern options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem # Networking options
options GATEWAY # packet forwarding
options INET # IP ICMP TCP UDP
#options PFIL_HOOKS # pfil(9) packet filter hooks # builtin terminal emulations
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_BLACK
options WS_KERNEL_BG=WSCOL_WHITE
# compatibility to other console drivers
#options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
#options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
#options WSDISPLAY_COMPAT_USL # VT handling
#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x24\"" # Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs #
# Device configuration
# mainbus0 at root cpu* at mainbus? apm0 at mainbus0 # Advanced power management # Basic Bus Support # PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci* at ppb? bus ? # PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
pceb* at pci? dev ? function ? # PCI-EISA bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc* at pci? dev ? function ? # PCI "universal" comm. cards # ISA bus support
isa0 at mainbus?
isa0 at pceb?
isa0 at pcib? # ISA Plug-and-Play bus support
isapnp0 at isa? # Coprocessor Support # Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor # Console Devices # ISA console
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver # wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
#pms* at pckbc? # PS/2 mouse for wsmouse
vga0 at isa?
vga* at pci? dev ? function ?
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
wsdisplay* at vga? console ?
wsdisplay* at pcdisplay? console ?
wskbd* at pckbd? console ?
#wsmouse* at pms? mux 0 pcppi0 at isa?
sysbeep0 at pcppi? # Serial Devices # PCI serial interfaces
com* at puc? port ? # 16x50s on "universal" comm boards
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards # ISA Plug-and-Play serial interfaces
com* at isapnp? # Modems and serial boards # ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board support
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards # Miscellaneous mass storage devices # Network Interfaces # PCI network interfaces
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10 /100B
le* at pci? dev ? function ? # PCnet-PCI Ethernet
pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
rtk* at pci? dev ? function ? # Realtek 8129/8139 amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
ukphy* at mii? phy ? # generic unknown PHYs # Pseudo-Devices # disk/mass storage pseudo-devices
pseudo-device md 1 # memory disk device (ramdisk)
#pseudo-device vnd 4 # disk-like interface to files # network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device pppoe 3 # miscellaneous pseudo-devices
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
# wscons pseudo-devices
pseudo-device wsmux # mouse & keyboard multiplexor
#pseudo-device wsfont 2、製作ramdisk鏡像 # dd if=/dev/zero of=/ramdisk bs=512 count=9000
# vnconfig -c /dev/vnd0d /ramdisk
# disklabel -r -w /dev/vnd0d rdroot
# newfs -m 0 -S 512 -i 4096 /dev/vnd0a
# mount /dev/vnd0a /mnt
# mkdir /mnt/{dev,bin,sbin,etc}
# cp /dev/MAKEDEV /mnt/dev
# cp /bin/{sh,ls} /mnt/bin
# cp /sbin/init /mnt/sbin
# cd /mnt/dev/ && ./MAKEDEV ramdisk
# echo 'echo "This is my minibsd all in kernel" && /bin/sh' > /mnt/etc/rc
# sync && umount /mnt
# sync && vnconfig -u vnd0d && sync 3、將ramdisk寫入kernel # mdsetroot /minibsd ramdisk 4、壓縮kernel大小 # gzip -9 -c /minibsd > /minibsd.gz 5、製作目標軟碟 因為系統需要使用/boot(/usr/mdec/boot)來載入kernel,所以我們需要在軟碟上放置boot檔。 # disklabel -B -w -r /dev/fd0a fd1440
# newfs -m 0 -S 512 /dev/fd0a
# mount /dev/fd0a /mnt
# cp /usr/mdec/boot /mnt
# cp /minibsd.gz /mnt/netbsd 現在你的ramdisk in kernel的mininetbsd系統就已經做好了。 注:任何轉載或摘抄請保留作者資訊和注明文章出處(中文FreeBSD用戶組 http://www.cnfug.org) 更多精采盡在CNFUG: http://www.cnfug.org/
_________________
CNFUG(China FreeBSD User Group):
http://www.cnfug.org/