C++ Builder VCL庫函數簡介 |
|
turboted
版主 發表:95 回覆:754 積分:452 註冊:2002-07-23 發送簡訊給我 |
原文取自 C builder資源中心
http://www.lotus-soft.com/51bcb/ 一.BORLAND C BUILDER VCL的內存管理函數 1. AllocMem
在隊中分配指定字節的內存塊,並將分配的每一個字節初始化為 0.函數原型如下:
void * __fastcall AllocMem(Cardinal Size); 2. SysFreeMem
釋放所指定的內存塊.函數原型如下:
int __fastcall SysFreeMem(void * P); 3. SysReallocMem
要求重新分配參數Size所指定的內存.函數原型如下:
void * __fastcall SysReallocMem(void * P , int Size);
二.Borland C Builder VCL的文件操作函數 1. FileOpen
打開指定的文件,如果返回為正數,表示操作成功,返回值為文件句柄:如果返回值為-1,表示操作失敗,函數原型如下:
int __fastcall FileOpen(const System::AnsiString FileName,int Mode); 2. FileCreate
以指定的文件名稱創建一個新的文件,如果返回為正數,表示操作成功,返回值為文件句柄,如果返回值為-1,表示操作失敗.函數原型如下:
int __fastcall FileCreate(const System ::AnsiString FileName); 3. FileRead
從文件中讀取指定字節的數據到緩沖區中,函數返回實際讀取的字節數,函數原型如下;
int __fastcall FileRead(int Handle,void *Buffer,int Count); 4. FileWrite
將緩沖區的數據寫入到指定的文件的當前位置中去如果操作成功,函數返回實際寫入的字節數,如果返回為-1,則表示操作產生錯誤,函數原型如下:
int __fastcall FileWrite(int Handle,const void *Buffer,int Count); 5. FileSeek
調整文件指針到新的位置,如果操作成功,則返回新的文件位置,如果操作失敗,則函數返回-1,函數原型如下:
int __fastcall FileSeek(int Handle,int Offset,int Origin); 6. FileClose
關閉指定的文件,函數原型如下:
void __fastcall FileClose(int Handle); 7. FileAge
返回指定文件的時間標簽,如果操作失敗,則返回-1,函數原型如下:
int __fastcall FileAge(const System::AnsiString FileName); 8. FileExists
用於測試指定的文件是否存在,如果存在返回真,否則返回假,函數原型如下:
bool __fastcall FileExists(const System::AnsiString FileName); 9. FileGetDate
返回指定文件的DOS時間標簽,如果操作失敗,則近回-1,函數原型如下:
int __fastcall FileGetDate(int Handle); 10.FileSetDate
更改指定文件的DOS時間標簽,如果操作成功,返回0,否則返回錯誤代碼,函數原型如下:
int __fastcall FileSetDate(int Handle,int Age); 11.FileGetAttr
返回指定文件的屬性,如果操作失敗,則函數返回-1,函數原型如下;
int __fastcall FileGetAttr(const System::AnsiString FileName); 12.FileSetAttr
更改指定文件的屬性參數,如果操作成功,則返回0,函數原型如下;
int __fastcall FileSetAttr(const System::AnsiString FileName,int Attr); 13.FindFirst
在指定的文件目錄內,搜尋符合特定屬性參數的文件,如果成功地查找到符合條件的文件,
則函數返回0,否則函數返回一個錯誤代碼,函數原型如下:
int __fastcall FindFirst(const System::AnsiString Path,int Attr,TSearchRec &;F); 14.FindNext
繼續搜尋FindFirst所指定屬性參數的文件,如果成功地查找到符合條件的文件,則函數返回0,否則函數返回一個錯誤代碼,函數原型如下:
int __fastcall FindNext(TSearchRec &;F); 15.FindClose
釋放FindFirst操作所申請的內存資源,函數原型如下:
void __fastcall FindClose(TSearchRec &;F); 16.DeleteFile
在計算機磁盤中刪除指定的文件,如果操作成功,則函數返回真,函數原型如下:
bool __fastcall DeleteFile(const AnsiString FileName); 17.RenameFile
更改指定文件的名稱,如果操作成功,則函數返回真,函數原型如下:
bool __fastcall RenameFile(const AnsiString OldName, const AnsiString NewName); 18.ChangeFileExt
更改指定文件的擴展名,函數原型如下:
AnsiString __fastcall ChangeFileExt(const AnsiString FileName,const AnsiString Extension); 19.ExtractFilePath
返回指定文件的工作路徑,函數原型如下:
AnsiString __fastcall ExtractFilePath(const AnsiString FileName); 20.ExtractFileDir
返回指定文件的工作目錄,函數原型如下:
AnsiString __fastcall ExtractFileDir(const AnsiString FileName); 21.ExtractFileDrive
返回指定文件的驅動器,函數原型如下:
AnsiString __fastcall ExtractFileDrive(const AnsiString FileName); 22.ExtractFileName
返回指定文件的文件名及擴展名,函數原型如下:
AnsiString __fastcall ExtractFileName(const AnsiString FileName); 23.ExtractFileExt
返回指定文件的擴展名,函數原型如下:
AnsiString __fastcall ExtractFileExt(const AnsiString FileName); 三,Borland C Builder VCL的磁盤管理函數 1. DiskFree
返回指定磁盤的剩余空間,如果操作成功,返回剩余磁盤空間,如果操作失敗,則返回-1,函數原型如下:
int __fastcall DiskFree(Byte Drive); 2. DiskSize
返回指定磁盤的空間,如果操作成功,返回磁盤空間,如果操作失敗,則返回-1,函數原型如下:
int __fastcall DiskSize(Byte Drive); 3. GetCurrentDir
返回當前工作目錄,函數原型如下:
AnsiString __fastcall GetCurrentDir(); 4. SetCurrentDir
設置當前工作目錄,如果操作成功,則返回真,函數原型如下:
bool __fastcall SetCurrentDir(const AnsiString Dir); 5. CreateDir
創建新的目錄,如果操作成功,返回真,否則返回假,函數原型如下:
bool __fastcall CreateDir(const AnsiString Dir); 6. RemoveDir
刪除指定的目錄,如果操作成功,返回真,否則返回假,函數原型如下:
bool __fastcall RemoveDir(const AnsiString Dir); 四.Borland C Builder VCL的字符串函數 1. UpperCase
將指定的AnsiString字符串轉換為大寫形式,函數原型如下:
AnsiString __fastcall UpperCase(const AnsiString S); 2. LowerCase
將指定的AnsiString字符串轉換為小寫形式,函數原型如下:
AnsiString __fastcall LowerCase(const AnsiString S); 3. CompareStr
比較兩個AnsiString字符串,函數原型如下:
int __fastcall CompareStr(const AnsiString S1, const AnsiString S2); 4. CompareText
比較兩個AnsiString字符串,函數原型如下:
int __fastcall CompareText(const AnsiString S1, const AnsiString S2); 5. StrLen
返回字符串的長度,函數原型如下:
Cardinal __fastcall StrLen(const char * Str); 6. StrEnd
返回字符串結尾指針,函數原型如下:
char * __fastcall StrEnd(const char * Str); 7. StrMove
從源字符串向目的字符串拷貝指定數目的字符,函數原型如下:
char * __fastcall StrMove(char * Dest, const char * Source, Cardinal Count); 8. StrCopy
將源字符串拷貝到目的字符串中,函數原型如下:
char * __fastcall StrCopy(char * Dest, const char * Source); 9. StrECopy
將源字符串拷貝到目的字符串中,並返回目的字符串結尾指針,函數原型如下:
char * __fastcall StrECopy(char * Dest, const char * Source); 10.StrLCopy
將源字符串指定數目的字符拷貝到目的字符串中,並返回目的字符串指針,函數原型如下:
char * __fastcall StrLCopy(char * Dest, const char * Source, Cardinal MaxLen); 11.StrPCopy
將AnsiString類型的源字符串拷貝到目的字符串中,並返回目的字符串指針,函數原型如下:
char * __fastcall StrPCopy(char * Dest, const AnsiString Source); 12.StrPLCopy
將源字符串(AnsiString類型)指定數目的字符拷貝到目的字符串中,並返回目的字符串
指針,函數原型如下:
char * __fastcall StrPLCopy(char * Dest, const AnsiString Source, Cardinal MaxLen); 13.StrCat
連接兩個字符串,並返回目的字符串指針,函數原型如下:
char * __fastcall StrCat(char * Dest, const char * Source); 14.StrLCat
將指定數目的源字符串連接到目的字符串,並返回目的字符串指針,函數原型如下:
char * __fastcall StrLCat(char * Dest, const char * Source, Cardinal MaxLen); 15.StrComp
兩個字符串相到比較,返回比較的結果,函數原型如下:
int __fastcall StrComp(const char * Str1, const char * Str2); 16.StrIComp
兩個字符串相互比較(不論大小寫),返回比較的結果,函數原型如下:
int __fastcall StrIComp(const char * Str1, const char * Str2); 17.StrLComp
對兩個字符串指定數目的字符進行比較操作,函數原型如下:
int __fastcall StrLComp(const char * Str1, const char * Str2, Cardinal MaxLen); 18.StrScan
在指定的字符串中尋找特定的字符,並返回字符串中第一個特定字符的指針,函數原型如下:
char * __fastcall StrScan(const char * Str, char Chr); 19.StrRScan
在指定的字符串中尋找特定的字符,並返回字符串中最後一個特定字符的指針,函數原型如下:
char * __fastcall StrRScan(const char * Str, char Chr); 20.StrPos
在Strl所指定的字符串中尋找Str2所指定的子字符串,並返回Str2在Str2中第一個子字符的指針,函數原型如下:
char * __fastcall StrPos(const char * Str1, const char * Str2); 21.StrUpper
將字符串轉換為大寫形式,函數原型如下:
char * __fastcall StrUpper(char * Str); 22.StrLower
將字符串轉換為小寫形式,函數原型如下:
char * __fastcall StrLower(char * Str); 23.StrPas
將指定的字符串轉換為AnsiString類型字符串對象,函數原型如下:
AnsiString __fastcall StrPas(const char * Str); 24.StrAlloc
為字符串分配指定字節的內存,並返回內存指針,函數原型如下:
char * __fastcall StrAlloc(Cardinal Size); 25.StrBufSize
返回*Str所指向內存的大小,函數原型如下:
Cardinal __fastcall StrBufSize(const char * Str); 26.StrNew
在堆中為指定字符串分配空間,並將字符串拷貝到此空間中,函數原型如下:
char * __fastcall StrNew(const char * Str); 五.Borland C Builder VCL的數值轉換函數 1. IntToStr
將整數轉換為AnsiString字符串,函數原型如下:
AnsiString __fastcall IntToStr(int Value); 2. IntToHex
將整數轉換為十六進制字符串,函數原型如下:
AnsiString __fastcall IntToHex(int Value, int Digits); 3. StrToInt
將AnsiString字符串轉換為整數值,如果不能進行轉換,則產生EConvertError異常,
函數原型如下:
int __fastcall StrToInt(const AnsiString S); 4. StrToIntDef
將AnsiString字符串轉換為一個數值,函數原型如下:
int __fastcall StrToIntDef(const System::AnsiString S,int Default); 5. FloatToStr
將浮點數轉換為AnsiString字符串,函數原型如下:
AnsiString __fastcall FloatToStr(Extended Value); 6. StrToFloat
將AnsiString字符串轉換為一個浮點數值,函數原型如下:
Extended __fastcall StrToFloat(const AnsiString S); 7. FloatToStrF
將浮點數轉換為指定格式的AnsiString字符串,函數原型如下:
AnsiString __fastcall FloatToStrF(Extended Value, TFloatFormat Format,int Precision, int Digits); 六.Borland C Builder VCL的時間函數 1. Date
返回TDateTime對象,包含當前的年月日信息,函數原型如下:
System::TDateTime __fastcall Date(void); 2. Time
返回TDateTime對象,包含當前的時間信息,函數原型如下:
System::TDateTime __fastcall Time(void); 3. Now
返回TDateTime對象,獲取當前的日期和時間信息,函數原型如下:
System::TDateTime __fastcall Now(void); 4. DatetimeToString
將TDateTime對象轉換為指定格式的字符串對象,函數原型如下:
void __fastcall DateTimeToString(AnsiString &;Result, const AnsiString Format,System::TDateTime DateTime); 5. DateToStr
將TDateTime對象(包含當前年月日信息)轉換為字符串對象,函數原型如下:
AnsiString __fastcall DateToStr(System::TDateTime Date); 6. TimeToStr
將當前日期轉換為字符串對象,函數原型如下:
AnsiString __fastcall TimeToStr(System::TDateTime Time); 7. DateTimetoStr
將TDateTime對象轉換為字符串對象,函數原型如下:
AnsiString __fastcall DateTimeToStr(System::TDateTime DateTime); 8. StrToDate
將字符串對象轉換為年月日對象,函數原型如下:
System::TDateTime __fastcall StrToDate(const AnsiString S); 9. StrToTime
將字符串對象轉換時間對象,函數原型如下:
System::TDateTime __fastcall StrToTime(const AnsiString S); 10.StrToDateTime
將字符串對象轉換為年月日時間對象,函數原型如下:
System::TDateTime __fastcall StrToDateTime(const AnsiString S); 11.DateTimeToSystemTime
將TDateTime對象轉換為操作系統時間,函數原型如下:
void __fastcall DateTimeToSystemTime(System::TDateTime DateTime, _SYSTEMTIME &;SystemTime); 12.SystemTimeToDateTime
將操作系統時間轉換為TDateTime對象,函數原型如下:
System::TDateTime __fastcall SystemTimeToDateTime(const _SYSTEMTIME &;SystemTime); 發表人 - turboted 於 2003/05/26 13:40:55
|
本站聲明 |
1. 本論壇為無營利行為之開放平台,所有文章都是由網友自行張貼,如牽涉到法律糾紛一切與本站無關。 2. 假如網友發表之內容涉及侵權,而損及您的利益,請立即通知版主刪除。 3. 請勿批評中華民國元首及政府或批評各政黨,是藍是綠本站無權干涉,但這裡不是政治性論壇! |